I was a bit overwhelmed last night putting together my last screencast. The actual recording of the screencast was done early last week and took about 25 minutes. But last night I set about getting things in order to upload things to the site and to YouTube. Needless to say the whole process was a dog’s breakfast and took me several times longer than it should have.

So in order to try and get a handle on it, I’ve used Gliffy to do up a simple flowchart (see below) of the shameful process I used. You will plainly see that I don’t know what I’m doing. But that shouldn’t be news to anyone.
Have a look if your interested and give me some suggestions if you see some step or process that is plainly retarded.

I’m going to try and streamline this mess so that it doesn’t take me 3 hours of fiddling to get things online once I finish recording a screencast. We’ll see how that goes.

Amidst the quagmire heathenx and I are calling ‘Codec Hell’, I did manage to get another Inkscape screencast done. This one demonstrates the use of Inkscape’s guides, gradients and some shadow effects to come up with a decent looking 3D device graphic. This one is about 17 minutes long (my longest to date), so I had to split the YouTube version into two parts. Hopefully I won’t lose anybody at the halfway mark. With their 10min/100MB limitation it makes screencasting about something substantial a bit of a tough one. But that’s one of the reasons we started screencasters.heathenx.org. So if you want to see the whole video in one piece, and in significantly higher quality, check it out there instead.

Also, please let us know via the comments here if you have any trouble watching the video.